Idle Line Preference and Idle Line Priority
The Idle Line Preference and Idle Line Priority features work in conjunction with each other. Idle Line Priority
cannot be set unless Idle Line Preference is enabled.
Idle Line Preference
When you enable this feature, a station automatically connects to an idle line when the user lifts the telephone’s
handset.
To set Idle Line Preference,
1. Go to STATIONS, then CLASS OF SERVICE.
2. Go to PAGE 2.
3. Make sure you are in the correct Class Of Service.
4. Click on IDLE LINE PREFERENCE.
5. Click APPLY.
Idle Line Priority
If you assign Idle Line Preference to a Class Of Service, use the Idle Line Priority feature to chose the order in
which the system searches for an idle line. You can place up to eight lines in this priority list.
To set Idle Line Priority,
1. Go to STATIONS, then STATION PROGRAMMING, then GENERAL.
2. Click on the IDLE LINE PRIORITY box.
The Idle Line Priority On... dialog appears.
3. Select the lines you wish to put in the Idle Line Priority box by highlighting them and clicking ADD. Make
sure you select the lines in the order you wish the system to search through them.
4. Click OK.
5. Click APPLY.
Installing The ATI-D-1PT – 11
Installing And Programming The ATI-D-1PT
IMI89–208