manualshive.com logo in svg

Comdial 7265-HS, Руководство пользователя

Поделиться
Скачать
Comdial 7265-HS Скачать руководство пользователя страница 20

Overview

20

Comdial

May ‘05

9. Move the handset close to the base.  The system starts to regis-

ter with the base unit.
If the registration operation is successful, the LCD displays the 
following.

Note

:  Up to two line cords can be used to connect two digital 

station ports from the KSU to the two jacks on the base.  If the 
handset ID is #1 this means the handset is connected to Line 
#1.  If the handset ID is #2 this means the handset is connected 
to line #2.

If the registration fails, the LCD displays the following.

(To try again, begin again at step 4.)

10.Next, change dip switch 1 to re-enter the normal mode.

Note

:

•  The LED on the base flashes normally when the unit enters 

normal mode.

•  If DIP switches are still set in the registration mode (switch 1  

off, switches 2 and 3 on), the unit is not operational except for 
registration during the first 30 seconds when re-powering on 
the unit.  After 30 seconds, the system goes back to normal 
mode.

(( ))        

>REGISTERING

HANDSET #1

(( ))        

>FAILED!

TRY AGAIN!

Содержание 7265-HS







































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды