Comcater COMENDA Prime PC07, Инструкция по эксплуатации и обслуживанию

Страница: 11 / 23

14
ENGLISH
2.1 PC OPERATION
2.1.a Switch-on and Preparing the machine (Fig. 1)
Part 2: Reserved for the operator
START START
To turn the machine on, keep the
START (ON/OFF) key pressed for
about 5 sec.
The START key turns YELLOW.
F2 appears on the display.
IMPORTANT
The last cycle used remains
set and is displayed when the
machine is switched on.
When the water level is reached in
the tank, the START key FLASHES
GREEN.
The set-point temperatures ap-
pear on the display.
The machine is already available
for washing in this condition.
In cycle start mode
AUTOMATIC
, a dot is displayed
in the lower left corner of the
display.
If the wash cycle is started with
the FLASHING GREEN key, the
START key will turn RED and H3
will appear on the right side of the
display.
When the set tank temperature is
reached, the START key lights up
STEADY GREEN.
START START
START
WASH OPERATIONS
Add the amount of industrial detergent into the tank,
as recommended by the manufacturer, indicated on
the product tank as a concentration in g/l.
Add an amount (in g/l) according to an average water
consumption of 3l with every wash.
The volume of water in the tank, which is necessary
for the amount of detergent to be calculated for models
PC
, is indicated on the page related to the technical
data of the dishwasher.
The rinse agent dosage is managed both during the
fi ll-up phase and during the restoring phase by means
of a hydraulic pump. The hydraulic pump is calibrated
by a qualifi ed technician during installation.
With each wash, the pump restores the values of the
rinse agent indicated by the manufacturer.
We recommend installing a peristaltic pump to dose
the detergent.
ATTENTION
When the items to be washed have burnt
deposits or much time has passed before
being washed, they must be soaked in wa-
ter with an appropriate emollient product.
Do not use manual washing products
as they could generate foam inside the
machine.
Introduce the dish rack into the machine after having
removed solid waste from the objects
to be washed.
2.1.b CYCLE SELECTION
The duration of the wash cycle can be chosen from
different cycle times, indicated by the respective
symbol:
START
Every time the key is pressed, the cycle to be per-
formed is displayed and the relevant BLUE LED
lights up.
EXTRA CYCLE FUNCTIONS
° C1
(SELF-WASHING)
° C2
(DRAIN) optional
° C3
(REGENERATE) for versions A
selected by pressing the SCROLL
key.
ECO GLASSES DISHES INTENSIVE
START START
TEMPERATURE
READINGS
The set-point temperatures of the
water in the tank and boiler ap-
pear on the display.
With the machine in stand-by,
the ACTUAL temperature in the
boiler and in the tank for the se-
lected cycle can be displayed by
pressing the BACk key.
If no key is pressed, after about 5
sec., the set-point temperatures
appear on the display again.
START START
START START