580A
www.comcast-sa.com
VIII. The construction personnel press the remote-control switch, and
the attached machine will to the automatic spin, hinge tightly and
cutting off.
IX. Press the second operation after one operation, do not continue to
operate many times, in case of the two-wire entangled together.
X. After you hear the machine beep for a long time, please restart the
power and the machine will restore to working condition.
XI. The wire guiding block is quick-wear part, so it is needing to be
adjusted if necessary. Loose the screw and adjust it to proper position
(see figure2). The proper diameter of the knot circle is 83 85mm.
XII. Torque Adjusting (see figure 3). Adjust torque when the knot
tightness is
improper. Press the “+” button to increase the torque when the knot is
loose (the factory setting is 10th level). The buzzer sounds according
to the related level, e.g. there are 4 buzzer sounds when the torque is
on 4th level. Press “-” button when the knot is too tight (the knot is easy
to be broken).
