CombiSteel 7178.1000, Инструкция по эксплуатации и техническому обслуживанию

Страница: 3 / 9

Gas Connections

The appliance must be connected in accordance with the national and local gas
standards of the country concerned..

Never connect the device directly to the tube..

Device gas inlets are marked on the body with the label ‘’GAS ”.

Connection to the gas installation should be made with metal flex pipe and ball
valve of appropriate diameter. The ball valve must be secured to a location away
from heat and easily accessible in case of danger.

The Flex connection hose must be changed periodically every 5 years. .

After the gas inlet connection is made, check for possible gas leaks.

The device must be supplied with the gas and pressure specified on the rating plate.

If the type of gas to which the appliance is set does not correspond to the type of gas
at the installation site, follow the instructions below..

CAUTION: All adjustments and modifications to the gas installation and
connection of the appliance must be carried out by authorized persons. Gas
pressures must not be used other than those specified on the technical data
sheet
TİPLER

7178.1000
– One Flame Stove

– Double Flame Stove

– Double Flame Stove ( High Power )

– Triple Flame Stove

– Fourth Flame Stove
Figure - 01