35
Section 13 - Installing the Infant Car Seat Without The Base
36
Section 13 - Installing the Infant Car Seat Without The Base
WARNING:
• Not all vehicle seat belts are suitable for
a car seat installation. See Section 14
for more information on suitable vehicle
seat belts.
This line must be horizontal
This line must be horizontal
Decide where in the vehicle to install the car
seat.
Check that the infant car seat will sit firmly in
that position.
Position the infant car seat at the correct
recline angle. Recline reference line on the
side labels MUST be horizontal.
NOTE:
• Vehicle MUST be parked on level
surface.
If it is not possible to get the infant car seat
sitting firmly and level move it to another
position in the vehicle or do not install in that
vehicle.
Some models of the Centre Infant Car Seat
have a rebound bar for additional stability in
the vehicle. Car seats with this bar must still
be positioned so recline reference line is
horizontal.
Rolled Towel or similar
Vehicle Belts must run in
straight line
ADDITIONAL SUPPORT
FOR THE CAR SEAT
Some vehicle seats do not provide enough
support to hold the infant car seat up at the
required angle.
If extra support is required a tightly rolled
towel or firm foam roll (pool noodle) can be
used.
Any extra support used to hold the infant
car seat up must not interfere with the
vehicle seat belts.
