Section 11 - Installation of Car Seat in Vehicle (continued)
49
Recheck car seat recline. Verify
reference line is horizontal
(fig. f)
.
Carry handle should be kept in
the carry position.
Removal Of Infant Car Seat From Vehicle:
Unbuckle vehicle seat belt.
Remove lap belt from vehicle lap belt guides.
Snap Belt Guide Covers closed.
Remove car seat from vehicle.
1
2
3
4
(fig. f)
Handle
Carry
Position
Recline
Reference
Line
10
• DO NOT use car seat without base for infant over 22 pounds
(10 kg). Death or serious injury can occur.
• Base MUST be used for infant over 22 pounds (10 kg).
WARNING
- DEATH or SERIOUS INJURY can occur
Section 12 - Stroller or Travel System Use
50
This infant car seat can only be used with certain Combi stroller models
to transport your infant.
Check Combi stroller information or the Combi USA, Inc. website at
www.CombiUSA.com, for an updated list of stroller models that will work
with your Combi Shuttle Infant Car Seat.
See stroller instruction manual for additional use information.
• Infant car seat MUST be secured to stroller. After installation,
lift car seat to verify it is securely locked onto stroller.
• DO NOT use this infant car seat with any strollers unless
approved by Combi USA, Inc.
• DO NOT lift or carry car seat by anti-rebound bar.
WARNING
- DEATH or SERIOUS INJURY can occur
