Using the Anti-Bounce Lever
Using the Music / Vibration Unit
Installing the Batteries
1. Pull down the Anti-Bounce Lever from the
bottom of the Support Base as shown in
figure 16.
1. Turn on the power by pressing the power
button.
2. Turn on the music by pressing the music
button.
3. Turn on the vibration by pressing the
vibration button.
4. Press the buttons again to turn off the
desired function.
1. The battery compartment is located
underneath by the foot of the seat. Use
a flat screwdriver to remove battery lid as
shown in figure 18.
2. Insert 3 AA batteries and close the battery
compartment lid.
figure 16
figure 17
figure 18
- 6 -
Warning
Do not lift up the Bouncer with a child in it.
The Bouncer may tip over and the child could
be injured.
Warning
● Do not mix old and new batteries.
● Do not mix alkaline, standard, or rechargeable batteries.
● Remove batteries when bouncer is stored for long periods of time
or when batteries are exhausted.
● Dispose of exhausted batteries properly.
● Keep batteries out of children's reach.
Power
Vibration
Music