Combi CROSSGO 4CAS, Инструкция по эксплуатации

Страница: 23 / 29

22
Installing the head support 護頭墊的安裝方法
Loop the head support belt through the head support hole, the
belt is tipped opposite through the hole to attach. After it is
installed, check if it is well secured to the seat cushion or not by
slightly pulling.
Reference for head support insertion outlets
for child from around 1 month to 4 months for child from
around 4 months to 7 months.
透過護頭墊穿孔通過頭部支援帶，將支援帶折迴繞過穿孔安裝。它被
安裝後，輕輕的拉動檢查它是否固定在可移動的座椅。
有關護頭墊穿孔 的參考
大約供1個月至4個月的幼兒使用。
大約供4個月至7個月的幼兒使用。
Installing the Body& Hip support 護背連臀墊的安裝方法
Using the supporting belts (upper position) of the
Body & Hip support to pass through the holes of the
seat cushion body support location. To fix the
supporting belts by opening the tail at the end.
Using the supporting belts (upper position) of the
Body & Hip support to pass through the holes of the
seat cushion hip support location. To fix the
supporting belts by opening the tail at the end.
The both sides of waist belts pass through the
upper holes of the Body & Hip support.
The crotch belt pass through the lower belt hole of the
Body & Hip support.
WARNING:
Please STOP using the body
and hip support which does not fit the child’s body
even if it is less than 3 years old. To detach, please
kindly follow the reverse steps.
將護背連臀墊護背上的支援帶穿過座椅上的身體支援帶
穿孔。將支援帶折迴繞過穿孔安裝。
將護背連臀墊護臀上的支援帶穿過座椅上的臀部支援帶
穿孔。將支援帶折迴繞過穿孔安裝。
請用護背連臀墊護背上的穿孔穿上腰帶；用護臀上的穿
孔穿上中央帶。
警告：
即使幼兒是3歲以下，若護背連臀墊不適合幼兒體
格，請立即停止使用。拆除時，以相反的步驟拆除。
A
A
A
B
B
B
A B
1
2
3
1
2
3
1
2
3