Combi Cradling360 ISOFIX, Инструкция по эксплуатации, Страница: 34 / 36

unsecured child car seat in case it may tip.
Pay particular attention when checking or
practicing installation indoors.
DIAGRAM 20.1 - Adjustment of baby belt
Rotate the child car seat to the sideway.
①
Flip the cover covering the baby belt adjustment knob. Press
on the "PUSH" button and
②
Hold and pull the left and right baby belt toward yourself to
loosen the baby belt.
*Do not hold at the shoulder belt cover. Baby belt won't be
adjusted when holding at the shoulder belt cover.
DIAGRAM 20.2 - Adjustment of headrest
①
Rotate the child car seat to rearward facing direction.
②
Lift the headrest adjustment lever and adjust it to the right
height.
DIAGRAM 20.3
①
Release the headrest adjustment lever at the right position.
②
Make sure the adjustment lever clicks into place after
adjustment.
③
Slightly move the headrest up and down to confirm it is
secured.
Seating the child
DIAGRAM 21.1 - For easy seating and unseating, you may rotate
the child car seat to sideway. Loosen the baby belt.
1. Press on the “PUSH” button of the buckle, release the insert
tongue.
2. Seat the child deeply into the child car seat
，
put the child’s
arms through the baby belt. When using the inner cushions,
adjust and make sure the child is seated deep inside the child car
seat.
3. Make sure the left and right baby belt is not twisted.
4. Make sure the protruded part should be set under baby’s neck.
DIAGRAM 21.2 - Match the left and right insert tongue and fasten
them to the buckle until they click into place.
WARNING:
Make sure the buckle is
secured to avoid child from falling off seat
accidentally during accident,or getting caught
by belt on its neck causing suffocation.
DIAGRAM 21.3
1. Always pull down the waist belt to hold the pelvis position.
2. The shoulder belt should be located in the center of the
child’s shoulder.
INSTRUCTIONS
32