USER MANUAL FOR RA-5J00
ENU STATUS : 1-0-0
Copyright - refer to title page
Page 40
5 OMT
The equipment can be monitored and controlled by OMT software running on a local PC with local
commissioning cable.
OMT software running on a local PC with serial connection to the equipment.
This chapter is to introduce how to apply local connection to OMT for the first installation, for the detailed
OMT information, please refer to OMT user manual and other references.
5.1
LOCAL CONNECTIONS TO OMT
After installing OMT software on the PC, connection to the equipment can be done locally.
Double click the OMT explorer icon, the OMT Explorer main screen window will appear.
5.1.1 CONNECTION FROM PC TO OMT
Before accessing to the OMT, physical connection between the OMT software and the equipment must be
made. A straight-through RJ45 cable shall be applied for the connection.
In order to access to equipment by IP protocol, the PC must be set with proper IP address and subnet
mask.
Figure 42: PC Protocol Setting
