Comar Systems CSB200, Руководство по программированию

Страница: 4 / 10

CSB200 Class B AIS
R1.0 7
•
Safety messages tab
o Displays safety related messages received from other AIS
equipped vessels.
•
Commands tab
o Provides access to software controlled features of the
CSB200 AIS transponder.
•
Serial Data tab
o Shows the raw NMEA serial data being generated by the
transponder. Provides a facility to log this data to a file for
later analysis.
o Allows NMEA commands to be sent to the transponder
Subsequent sections describe the functions of each tab in more detail.
Menu Bar
The menu bar provides basic program options.
Under the 'Options' menu item checking 'Beep on AIS Transmission' will
cause the PC to emit a sound every time the connected AIS unit
transmits.
The Help -> About menu item displays the program splash screen and
version information.
Static Data
This tab shows the current configuration of the AIS transponder and
allows the configuration to be programmed during installation into a
vessel.
CSB200 Class B AIS
R1.0 8
When an un-configured AIS transponder is connected for the first time
the display will be similar to that shown below:
To configure the transponder all of the data fields must be completed and
saved to the AIS.
L
CAUTION:
For security reasons the MMSI of the vessel cannot be
changed once programmed. Do not programme the MMSI
unless you are certain you have the correct information.
Please check the number entered carefully. If the MMSI
programmed is incorrect the AIS transponder will need to
be returned to the supplier for factory reset.
Enter the vessels information in the appropriate box:
•
Ship's name - enter the name of the vessel (20 characters
maximum)
•
Call Sign - enter the vessel's radio call sign (7 characters
maximum)