Comar Systems 001-1019, Руководство пользователя

Страница: 23 / 32

CSB200-S
23
13.2.2 Connection to a NMEA 0183 Plotter or Radar
The CSB200-S may be connected to a chart plotter or a RADAR using the 9-way data cable supplied
and using the following connections:
Pin:
Cable core
colour
CSB200-S Connection: Plotter Connection:
2 Red, RD NMEA Output Port 1 (38400 Baud default) (+) NMEA Input (+)
5 Green, GN NMEA Output Port 1 (38400 Baud default) (–) NMEA Input (–)
13.3 NMEA 2000 Connection
For a NMEA 2000 connection (IEC 601162-3) a specialist drop cable will be required (not supplied).
This should be connected from the rear connector of the CSB200-S into the trunk of your existing
NMEA 2000 network. COMAR recommends that you obtain advice from a professional installer if a
NMEA 2000 installation is required.
Pin : NMEA 2000 Designation: Function:
1 Screen Screen (shield)
2 NET-S + 12 v dc
3 NET-C 0 v return
4 NET-H Data High (CAN-H)
5 NET-L Data Low (CAN-L)
1
3 4
5
2
5-Way NMEA 2000
Male Connection