ComAp InteliVision 5 CAN Скачать руководство пользователя

Страница: 7 / 51

InteliVision 5 CAN - 1.3.0, Global Guide

2.1 General description

InteliVision 5 CAN is the display unit equipped with CAN interface. It is designed as a Plug and Play solution

with economical visibility of all engine data and monitoring information in colorful display. The compact ComAp

InteliVision 5 CAN display unit is suitable for harsh environments.

Because of the same cut-out as I-RD-CAN the InteliVision 5 CAN can be easily used as a replacement..

InteliVision 5 CAN is offered in two hardware modifications:

InteliVision 5 CAN

InteliVision 5 CAN Backlit

Germanischer Lloyd MARINE approval

Backlighted keyboard

Note:

Just onlyInteliVision 5 CAN Backlit version is covered by Germanischer Lloyd MARINE approval. The

only difference between these two versions is a presence of the standard or backlighted keyboard version. Both

versions are IP65 protected from all sides and equipped with the binary output switch for HORN signaling. CAN

interface is galvanically isolated.

Both versions supports the InteliDrive controllers (ID-DCU, ID-DCU-Marine, ID-Mobile, ID-Mobile Logger) and

InteliGen-NT and InteliSys NT family controllers as well.

InteliVision 5 CAN Global Guide is mainly dedicated to describe functionality with regards to InteliDrive

controller family. It is supposed to use IntelIVision 5 CAN and InteliVision 5 CAN backlit mainly in InteliDrive

controller applications.

Optional accessories are available :

InteliVision 5 Harness-2:

2m prefabricated cable with unassigned wires at the end

InteliVision 5 IP 65 Connector:

connector set containing connector body and 10 corresponding terminal

female pins

ECU Simulator:

set containing supported USB/CAN converter and various cabling, for new

firmware/font/logo download into the InteliVision 5 CAN

2.2 Controller Firmware and PC Software

Supporting InteliVision 5 CAN

Actual controller firmware version

ID-DCU Marine-3.0.0

ID-DCU Industrial-3.3.0

ID-Mobile-2.3.0

ID-Mobile Logger-2.4.0

Table 2.1 Available firmware

Содержание InteliVision 5 CAN




















































Результаты поиска

Содержание InteliVision 5 CAN

Отзывы:

Похожие инструкции для InteliVision 5 CAN

Бренды по названию

Популярные бренды

ComAp InteliVision 5 CAN, Глобальное руководство

Результаты поиска

Содержание InteliVision 5 CAN

Отзывы:

Похожие инструкции для InteliVision 5 CAN

Бренды по названию

Популярные бренды