ComAp InteliLite NT MRS19, Быстрый старт

Страница: 10 / 14

Step 13:
You will be asked if you want to save the actual archive- this is a default archive and saving
it is not necessary, so select “no”.
Step 14:
The configuration of the old controller will pop up, select “Write to controller” (shown
below)
▪
You will be asked if you want to overwrite setpoints by values from the selected archive, press
“Yes”.
Your controller is now programmed!
▪
Please take the time to verify all setpoints and configuration has transferred properly. There
can sometimes be errors when a large firmware change is taking place. There can also be errors
when the updated firmware version has new setpoints/features that were previously not there.