ComAp IM-NT, Справочное руководство

Страница: 283 / 328

InteliMains
NT
, SW version 3.0
InteliMains-NT-BTB-3.0-Reference Guide.pdf,
©ComAp – June 2013
283
N
OTE
:
The reaction on changes of these inputs is delayed about 1 sec to ensure the
new combination is valid (e.g. if a rotary selector switch is used).
C
AUTION
!
Each language change causes the reinitialization of the display. Function of
the controller is not influenced.
14.2.1.84 Binary input: Lang sel int B
Related FW 3.0
Description This is one of three binary inputs Lang sel int A , Lang sel int B , Lang sel int
C , used for selecting language of the built-in IG-NT terminal (display). As the
IS-NT does not have built-in terminal, this input is assigned to the terminal
(display) #1, which is supposed to be directly attached to the controller or
mounted close to it.
N
OTE
:
Using these inputs for language selection is an option only. If the inputs are
not configured, the language can be selected using the menus on the
terminal.
E
NCODING TABLE
L
ANGUAGE INDEX
I
NPUT
A I
NPUT
B I
NPUT
C
0 0 0 0
1 1 0 0
2 0 1 0
3 1 1 0
4 0 0 1
5 1 0 1
6 0 1 1
7 1 1 1
N
OTE
:
"0" in the table means the input is not active or not configured.