21
DAILY MAINTENANCE
CLEANING OF THE SQUEEGEE
1.
Lift up the squeegee assembly moving forward the manipulator (1)
2.
Remove the suction hose from the squeegee connection (2)
3.
Push the unhooking lever (3) and lift up the squeegee.
4.
Push the squeegee letting the support arm slide forward (4).
5.
Rotate the squeegee until the arm (4) stops on the guide.
6.
The unhooking (3) lever lift up automatically after the hooking of the brush ready to be pressed
again.
7.
Clean the squeegee using a jet of water.
Verify
the conditions of the rubbers and if necessary
replace them. Taking care about the cleanliness of the squeegee assembly let the life of the
suction motor be longer.
8.
After the squeegee clean operations push the unhooking lever (3) and pull the squeegee in the
rear side unitl it reach the initial position.
1
2
3
4
3
