background image

 

 

 

On consignment of the machine  
 
When the machine is delivered to the customer, an immediate check must 
be performed to ensure all the material mentioned in the shipping 
documents has been received, and also to check the machine has not 
been damaged during transportation. If this is the case, the carrier must 
ascertain the extent of the damage at once, informing our customer 
service office. It is only by prompt action of this type that the missing 
material can be obtained, and compensation for damage successfully 
claimed. 

Introduction 
 
Simpla is a floor scrubbing machine which, by means of the mechanical 
action of the rotating brush and the chemical action of a water/detergent 
solution, can clean any type of flooring. As it advances, it also collects any 
removed dirt as well as the detergent solution not absorbed by the floor. 
The machine must only be used for this purpose. Even the best 
machines will only work well if used correctly and kept in good working 
order. We therefore suggest you read this instruction booklet carefully and 
read it again whenever difficulties arise while using the machine. If 
necessary, remember that our customer assistance service (organised in 
collaboration with our dealers) is always available for advice or direct 
intervention. 

Intended use 
 
The scrubbing machine is designed exclusively for the professional 
cleaning of surfaces and floors in industrial, commercial and public 
environments. The machine is only suitable for use in closed (or at least 
covered) places. 
The machine is not suitable for use in the rain, or under water jets. It is 
FORBIDDEN to use the machine in places with a potentially explosive 
atmosphere, for picking up dangerous dusts or inflammable liquids. In 
addition, it is not suitable as a means of transport for people or objects. 

Serial number plate  

 

        

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TECHNICAL DESCRIPTION  

UM 

SIMPLA 50 B 

SIMPLA 50 BT 

SIMPLA 50 E 

Содержание SIMPLA 50 B
































Отзывы: