COMAC C85B-C100B, Инструкция по эксплуатации, Страница: 9 / 27

36
MACHINE PREPARATION
5. CONNECTION OF THE BATTERY CHARGER
The connector is placed in the left lower part of the operator seat. The
upper part (1), which is connected to the batteries, is the one which has to
be inserted to the connector (2) fixed to the cables of the battery recharger.
The coupling connector of the battery charger is delivered in the bag where
this instruction booklet is found and must be assembled on the battery
charger cables following the suitable instructions (see instruction booklet of
the battery recharger).
6. RECHARGE OF THE BATTERIES
In order not to cause the risk of permanent damage to the batteries, one
should at all costs avoid their complete discharge and effect recharging
within a few minutes after that the signal lamp of discharged batteries
begins to blink.
NOTE : Never leave the batteries completely discharged, even if the machine
is not being used. When recharging the batteries, keep the base support
of the seat lifted. Every 20 recharging operations, check the level of the
electrolyte and, if necessary, top up with distilled water.
WARNING! For the daily recharge of the batteries, it is
necessary to follow strictly all the indications given from the
constructor or from his dealer. Specialized staff must carry out
all the installation and maintenance operations. Danger of gas
exhalations and emission of corrosive liquids. Fire danger:
do not approach with free flames.
7. LEVEL INDICATOR FOR THE CHARGE OF THE BATTERIES
The batteries’ indicator is digital with 4 fixed positions and a blinking one.
The numbers which appear on the display show the approximate charge
level.
4 = maximum charge, 3 = charge 3/4, 2 = charge 2/4, 1 = charge 1/4,
0 = (blinking) discharged batteries
WARNING! Some seconds after that “0” blinks, the brushes
motor automatically switches off. Anyway, the machine can
finish to dry before recharging the batteries.