Page 17 of 17
INSTRUCTION MANUAL
LI-1100C
LINE IMPEDANCE STABILIZATION NETWORK
19121 El T oro R d ● S il vera d o, Ca lifo rnia 926 76 ● (94 9) 459 - 9600 ● com - p ower.com
REV022717
8.0
W
ARRANTY
Com-Power warrants to its Customers that the products it manufactures will be free from
defects in materials and workmanship for a period of three (3) years. This warranty shall
not apply to:
Transport damages during shipment from your plant.
Damages due to poor packaging.
Products operated outside their specifications.
Products Improperly maintained or modified.
Consumable items such as fuses, power cords, cables, etc.
Normal wear
Calibration
Products shipped outside the United States without the prior knowlege of Com-
Power.
In addition, Com-Power shall not be obliged to provide service under this warranty to
repair damage resulting from attempts to install, repair, service or modify the instrument
by personnel other than Com-Power service representatives.
Under no circumstances does Com-Power recognize or assume liability for any loss,
damage or expense arising, either directly or indirectly, from the use or handling of this
product, or any inability to use this product separately or in combination with any other
equipment.
When requesting warranty services, it is recommended that the original packaging
material be used for shipping. Damage due to improper packaging will void warranty.
In the case of repair or complaint, Please visit our website www.com-power.com and fill
out the RMA form (http://com-power.com/repairservicereq.asp). Our technical assistance
personnel will contact you with RMA number. The RMA number should be displayed in a
prominent location on the packaging and on the product, along with a description of
the problem, and your contact information.
8.1 Maintenance
This product contain no user serviceable parts inside. If the unit does not operate
or needs calibration, please contact Com-Power Corporation. Any modifications
or repairs performed on the unit by someone other than an authorized factory
trained technician will void warranty.
The exterior surface may be cleaned with mild detergent and then be wiped with
a dry, clean, lint-free cloth. Use care to avoid liquids or other foreign objects
entering the chassis.
Distributed by: Reliant EMC LLC, +1 408 916
‐
5750, [email protected], www.reliantemc.com