Columbus V - 990 Mark II, Руководство пользователя, Страница: 31 / 40

Track logging
cannot be
initiated
●
The device has not acquired the position yet. Its logging function cannot be
normal until the position is acquired.
●
The logging function has been disabled
.
Short press the Power
/
Function button
to activate the logging function
.
●
The memory card space is full
,
or there are more than 512 files under the root
directory. Back up and remove files from the card whenever necessary.
●
Make sure that you have correctly plugged the memory card.
●
Make sure that the memory card has been formatted to FAT/FAT16.
●
The device supports Micro SD/T-Flash memory cards with a capacity of 64M - 4G.
Make sure that the capacity of your current memory card falls within this range.
18
Log LED
continuously
flashes and the
device emits
audible alarms
16
14
14
26
There is no photo
point on the track
There's no photo in the
photo point
Photos do not correctly
match their track
points
There is no voice point
on the track
I hear no voice
Make sure that you have activated the photo point output function in "TIME
ALBUM". The digital photos you added do not support the EXIF protocol.
●
Make sure that the added photos have not been deleted or moved.
●
Make sure that you have correctly set the camera time as well as the time zone in
"TIME ALBUM".
●
Make sure that you have activated the voice point output function in "TIME ALBUM".
●
Make sure that a media player is correctly installed on your computer.
26
31
Troubleshooting
(2/3)
Track Logging
Photo and
Audio Records
Symptoms Page Causes and Remedy
Symptoms
Page Causes and Remedy
35
25