Columbia THERAPEDIC 2000 Скачать руководство пользователя страница 7

22 

 

4. 

To adjust pads, lift the upholstery cover from the sides of the 
restraint shell.  The pads are located between the inside of the 
plastic shell and the cover.   

5. 

Stretch the upholstery cover back over the pads and the edge of 
the shell. 

 

Optional Accessories

 

 
Seat Depth Extender 

The seat depth extender provides extra 
support for taller individuals.  It is used 
when a user’s legs have grown too long to 
allow a comfortable seating position.

 

 
 
Extensor Thrust Wedge 

Changes seat to back angle by increasing 
the front height. 
 
 

 
Swing-Away Abductor 

The swing-away abductor is 
used to improve hip 
alignment and stabilize 
seating posture. 
 
 
 
 

Headwings 

Height adjustable soft-padded headwings 
 
 
 

Block Style Positioning Pads 

Additional pads for special positioning needs.  
Block style, two pads 2½” thick and two pads   
1½” thick. 

 

 



Lap belts with an emergency locking retractor (ELR), which means 
that the lap belt will only lock in the event of a sudden stop or crash. 

 



Motorized seat belts that automatically surround the passenger 
when the door is closed. 

 



Combination lap and shoulder belts with a “sewn lock plate”.  The 
lap belt is sewn to the side of the lock plate (the “male” part of the 
seat belt buckle), while the shoulder belt is sewn to the top of the 
lock plate.  Each belt feeds into a separate emergency-locking 
retractor prohibiting proper control of the seat belt tension. 

 

 

           

 

 



This Positioning Restraint System must 

ONLY

 be used in 

forward-

facing vehicle seats.

 

 



This Positioning Restraint System is to be used 

ONLY

 in the 

forward-facing position.

 

 



This Positioning Restraint System 

CANNOT

 be used in the 

following seating positions: 



Rear-facing vehicle seats, such as those in some vans or 
buses. 



Side-facing vehicle seats, such as those in some vans and 
pick-up trucks. 



Flip-down vehicle seats, often referred to as “jump-seats.” 

 

NOTE:  According to research sponsored by the National 
Highway Traffic Safety Administration, children are 
significantly safer when properly restrained in the back seat, 
compared to the front seat. 

 
 
 

Vehicle Seating Positions

 

Содержание THERAPEDIC 2000















Отзывы: