26
Cleaning the Harness and Buckle
The harness straps may be cleaned by sponging them with warm
water and a mild detergent.
The buckle may be cleaned with a damp cloth and mild detergent.
Towel dry — make sure the that harness and buckle are completely
dry before reinstalling.
DO NOT bleach, machine wash or machine dry.
DO NOT disassemble the harness.
DO NOT use abrasive cleaners.
.
IMPORTANT
IMPORTANT
IMPORTANT
In case of a recall, we can reach you only if we
have your name and address. You MUST send
in the attached card to be on our recall list.
The postage is paid.
Do it today!
Please complete and return the owner registration card with-
in 30 days of purchase. This registration card is attached to
the shoulder strap of the Positioning Restraint System. A
sample of the registration card is shown below.
3
WARNING!
DEATH OR SERIOUS
INJURY can occur:
!
MODEL #2000
: Use only with individuals who weigh between 20 and
102 pounds (9.1— 46.3 kg) and whose height is less than 60
inches (152.4 cm).
MODEL #2500
: Use only with individuals who weigh between 40 and
130 pounds (18.1 — 59.0 kg) and whose height is
54 – 66 inches (137.2 – 167.6 cm).
Snugly adjust the belts provided with this Positioning Restraint
System around the user. A snug strap should not allow any slack.
It lies in a relatively straight line without sagging. It does not press
on the user’s flesh or push the user’s body into an unnatural
position.
Secure the top anchorage strap (tether) provided with this
Positioning Restraint System.
Secure this Positioning Restraint System with your vehicle's seat
belt.
Read and follow all instructions
on this Positioning Restraint
System and in the written instructions located on the side of the
restraint.