Columbia RZT S Series, Руководство оператора

Страница: 9 / 38

Assembly & Set-Up
3
9
Contents of Crate
• One Lawn Tractor • One Deck Wash Hose Coupler • One Operator’s Manual
• One Engine Operator’s Manual • Two Hex Screws and Flat Washers
NOTE:
This Operator’s Manual covers several models. Tractor
features may vary by model. Not all features in this manual are
applicable to all tractor models and the tractor depicted may
differ from yours.
Tractor Preparation
1. Remove the upper crating material from the shipping
pallet, and cut any bands or tie straps securing the tractor
to the pallet.
2. If the deck is not in the highest mowing position (pulled
all the way back), use the deck lift handle to raise the deck
to its highest position. Refer to the Controls & Features
section for instructions on raising and lowering the deck.
3. Disengage the parking brake.
4. Engage the transmission bypass rods on each side of the
tractor; then carefully roll the tractor off the shipping
pallet. The transmission bypass rods (one for each the RH
and LH transmission) are located on the rear of the tractor,
just inside each rear wheel. Engage the bypass rods by
pulling each one out and to the right then letting it return
to lock it into place. See Figure 3-1.
a
b
Figure 3-1
5. Disengage the bypass rods after rolling the tractor off the
pallet. See Figure 3-1.
6. Remove the deck wash system nozzle adapter from the
manual bag and store for future use.
Steering Wheel Column
The steering wheel column is tilted all the way back for shipping.
1.
Place the steering column in one of the two positions
and secure in place with the hex screws and flat washers
packed seperately. See Figure 3-2.
Hex Screw
Flat Washer
Figure 3-2