4
EN
GL
IS
H
• The product is only intended for personal domestic use and only in the manner
described in this instruction manual.
• The product must never be installed directly beneath a wall socket.
• Make sure that the mounting surface is flat, sound and capable of supporting
the product.
• Never handle the product with wet or moist hands.
• The product must not be used in rooms where flammable liquids, gases or
combustible materials are stored.
Installation
Note:
• Ensure the surface that you intend to mount the heater on is stable enough to
adequately bear the weight of the heater.
• Before drilling mounting holes into the intended wall/ceiling, make sure that it is
free from electrical wiring and water pipes.
• Do not mount the heater directly under a power point.
• Do not mount the heater in extremely dusty rooms.
1. Use the included screws to mount
the wall/ceiling mounts onto the heater.
2. Place the heater with its mounts against
the proposed mounting surface and mark
the mounting holes onto the surface.
3. Mount the heater following the minimum distance to an adjacent surface as
specified in the figure below. Use the included screws and plugs for mounting or
an alternate appropriate fastening method.
