SG Series Technical Manual
Page 7 of 10
15. Review the image, and see if
there is any difference.
16. If the focus looks to be
getting better, move the
screw in the same direction a
bit more. If looks worse, turn
it back to the reference mark
and move a bit more in that
same direction
17. If the image looks worse, turn
it back to the reference mark
and continue to move a small
amount in that same
direction.
18. Repeat until the focus looks
as good as it can get. It
maybe that the alignment
moves, and the auto-stitch
will bring it back in. If not the
scanner will need to be
returned for alignment, as
this is not possible in the
field.
