Ci Instruction Manual
Page 18 of 20
4. The Manual Stitch tab
allows for manual
adjustments to be made to
the stitch values.
5.
Set Motor Speed.
This can
be adjusted by over writing
a
value and clicking ‘Set
Motor Speed’.
Note this
value before removing the
old Main board.
6. Set Load Delay changes
the time it takes for media
to me taken in by the
scanner.
(Image shown is the stitch layout for the Ci24 with 3 CIS)
7. Firmware Installation will
allow the firmware to be
updated. The firmware can
be downloaded from the
website, or sent via email,
and stored on the PC
connected to the scanner.
Use the browse button
(“…..”) to find the stored
file, and ‘Download’ to
update the file into the
scanner*. Restart the
scanner and software on
completion.
* IMPORTANT NOTE: UNDER NO CIRCUMSTANCES MUST
COMMUNICATION BE LOST WITH THE SCANNER DURING
FIRMWARE DOWNLOAD AS THIS WILL IRREVERSIBLY
CORRUPT THE MAIN BOARD
8.
Click ‘OK’ to close the
utilities screen.
