Colortrac M25e, Руководство по обслуживанию

Страница: 10 / 129

M Series Service Manual
Page 10 of 129
8 Warranty
Each Colortrac Scanner starts its warranty period when first shipped from Colortrac to the
purchasing Distributor. Non-consumable parts that fail within the warranty period without
inappropriate influence or action will be replaced free of charge.
Distributors are required to identify faulty parts. To help identify faults quickly it is
recommended that Distributors hold spare parts. Parts that are replaced under warranty
must be returned to Colortrac using the address at the front of this manual.
When a Distributor requests a warranty replacement, Colortrac Technical Support will
issue them an RMA reference number. The warranty replacement is dispatched once
Colortrac receives the defective part. In exceptional cases, Colortrac may agree to send
a warranty replacement before the defective part has been received.
8.1
Warranty Period
The Colortrac warranty period is 2-years. The warranty period starts on the date the
product is handed to the carrier for delivery. The start of the warranty period may be
delayed by 3-months to coincide wit
h its installation at a customer’s site. To request a
deferment to the start of the warranty period follow the procedure on ‘How to extend
warranty’ at Chapter 15.1.
8.2
Consumables
Parts that wear according to operator usage are deemed consumables and not replaced
under warranty. Consumables can be purchased from Colortrac. Those M Series parts
considered to be consumables are:

SingleSensor Glass Sub-Assy

Hold Up Roller Unit

Hold Up Roller Unit Support Bar

Lower Covers and Upper Covers

Calibration Target

Timing Belts
9 Control Board Replacement Statement
In Warranty: M Series Control Boards that fail within the warranty period will be replaced
free of charge. If the Control Board is to be fitted in a scanner that has been upgraded,
Colortrac will also provide a free upgrade to configure the Control Board. As part of
standard warranty procedures, Colortrac will require that the defective Control Board is
returned within 28 days.
Out of Warranty: A new M Series Control Board used from stock or is a direct purchase
from Colortrac, may need to be upgraded. Colortrac will provide a free upgrade for the
new Control Board on condition that the defective Control Board is returned to Colortrac
within 28 days.