Colormetrics P1000, Руководство по установке

Страница: 43 / 70

35
Clearing CMOS
1.
Remove all removable media, such as compact discs, from the system unit.
2.
Turn off the system power properly through the operating system, then turn off any
external devices.
3. Disconnect the power cord from the power outlet and disconnect any external devices.
CAUTION:
Regardless of the power-on state, voltage is always present on the main board as
long as the system is plugged into an active AC outlet. You must disconnect the power cord to avoid
damage to the internal components of the system.
4.
Remove the CPU box and CPU box cover.
5. Locate CN1 connector on the main board.
NOTE:
Before setting jumper in the CN1 connector. Please refer to page 33 CN1 Jumper
Function.
6. Replace the CPU box cover and CPU box.
9.
Reconnect the power cord and any external devices, then turn on the system.
CN1 Jumper