Colormetrics P1000, Руководство по установке

Страница: 35 / 70

27
Installing Compact Flash Card
1.
Remove all removable media, such as compact discs, from the system unit.
2.
Turn off the system power properly through the operating system, then turn off any
external devices.
3. Disconnect the power cord from the power outlet and disconnect any external devices.
CAUTION:
Regardless of the power-on state, voltage is always present on the main board as
long as the system is plugged into an active AC outlet. You must disconnect the power cord to avoid
damage to the internal components of the system.
4.
Remove the CPU box.
5. Locate the CF card socket in the side of CPU box.
6.
Insert the CF card into the socket, until the card back button up.
7. Replace the CPU box.
8.
Replace the front base cover.
9.
Reconnect the power cord and any external devices, then turn on the system. The
system should automatically recognize the CF card device when you turn on the system.
NOTE:
CF card and 2.5” HDD master/slave setting:
P1000 allow the use of CF card and hard disk at the same time, but user need to set the system BIOS to
boot the order. When P1000 installed only the CF card, or just install 2.5 "hard disk, BIOS will be
automatically be designated as a 'master' as a system boot device.