User Manual
www.colorlight-led.com Version: V1.0 2015/11/26
In Classic Mode, LED screen need set up the Receiver (Receiving card) connection
relationship for each network port of the sending card.
1) Receiver Lay out Setting
Set how many Receiver (Receiving card) one port managers in Row Count and Col
Count (3*3 as an example), how many pixels one Receiver (Receiving card) manages in
Width and Height (64*64 as an example), in the software interface right you will see led
display mapping area (Viewing from the front of led display). (As shown in Fig.5-7)
Fig.5-7
2) Receiver Card Parameters Setting
Configuration Receiver (Receiving Card) connection pattern for each port individually
if more than one port are used. There are two methods to set up.
Note: Set up connection Receiver (Receiving Card) must be based on fact.
Use Mouse Select One By One
Based on the actual connection of the Ethernet cable, click the Receiver (Receiving
card) one by one until the last one for this network port loads, connection lines will show in
the display mapping area (Viewing from the front of led display) (As shown in 5-8)
