11
7. DMX Connections
Ø
DMX Cable
：
The KasBar COB Tri 5 can be controlled via DMX using a 3-pin XLR connection. The
standard DMX connection is XLR is: one end connects to the male plug, and the other
connects to the female. As below: pin 1: ground, pin 2:
negative signal, pin 3:
positive signal
Noted
：
In order to avoid failures and interference signal transmission
，
we connect a
resistance120
Ω
（
1/4W
）
at the end of the DMX connecting as below:
Ø
The Conversion between 3 pin and 5 pin XLR
If the output cable of DMX512 controller is the 5PIN, please use 1pc 5PIN to 3PIN cable
