1
Introduction
Thank you for purchasing the ColorKey WaferPar HEX 12. Please read these
instructions carefully before use. Operating this fixture according to these instructions is
important to avoid any possible damage or accidents caused by misuse.
Ø
Packing list
n
1x WaferPar HEX 12
n
1x Power cord
n
User Manual
Safety
Caution!
Opening this unit voids warranty. Contact ColorKey for any service requests.
Warning!
To avoid electrical shock, be sure to disconnect power before any service or when
moving or setting up the fixture.
Caution!
Avoid direct eye exposure with the fixture when on.
Ø
This fixture is for indoor use only.
Ø
This fixture must be installed a minimum distance of 5 meters (16’4”) away from any
lighted objects.
Ø
Do not install or operate this fixture near flammable materials.
Ø
This device must be installed, operated, and maintained by a qualified professional.
Ø
Do not touch the fixture with bare hands during operation as the surface temperature of
the fixture can exceed 60˚C (140˚F). Turn off power and wait 15 minutes for the fixture to
cool before attempting to touch it.
Ø
Please check if the voltage is in accordance with the rated power before installing.
Ø
Do not operate this fixture if the power cord has been damaged. Turn off fixture and
replace with a power cord of similar rating.
