1
Introduction
Thank you for purchasing the ColorKey Blaster 2R. Please read these instructions carefully
before use. Operating this fixture according to these instructions is important to avoid any
possible damage or accidents caused by misuse.
Packing list
n
1x Blaster 2R fixture
n
1x DMX cable
n
1x Power cord
n
User Manual
Safety
Caution!
Opening this unit voids warranty. Contact ColorKey for any service requests.
Warning!
To avoid electrical shock, be sure to disconnect power before any service or when moving or setting
up the fixture.
Caution!
Avoid direct eye exposure with the fixture when on.
•
This fixture is for indoor use only.
•
This fixture must be installed a minimum distance of 5 meters (16’4”) away from any lighted objects.
•
Do not install or operate this fixture near flammable materials.
•
This device must be installed, operated, and maintained by a qualified professional.
•
Do not touch the fixture with bare hands during operation as the surface temperature of the fixture can
exceed 60˚C (140˚F). Turn off power and wait 15 minutes for the fixture to cool before attempting to touch
it.
•
Please check if the voltage is in accordance with the rated power before installing.
•
Do not operate this fixture if the power cord has been damaged. Turn off fixture and replace with a power
cord of similar rating.
