Page
31
of
36
SubliXpress
•
Auto Capping Time:
Define the auto capping time. When the printer is ideal for the define
time then auto capping process gets started and capped the capping station with the head
plate.
Setting Wiping and Capping Height
Using the Setting window, user can set the wipping and capping height by updating values in the Z
Clean Pos and Z Wet Pos list boxes, as shown below:
Fig 48: Setting Wiping and Capping Height
Head Purging
Head purging refers to the method in which heads are cleaned by forcing pressurized ink though the
nozzles. The Head Purging button of each color is shown in the image below:
Fig 49: Purging Inks
Note:
Machine must be ON always.
Head Spraying
Head spraying should be performed only when small percentage of nozzles are blocked. This method
is used to avoid mixing of colors. When heads are sprayed all the nozzles are actuated at a high rate
which helps in opening up dry nozzles of the printer. To perform head spraying,
click
on the
Spray
button available under the
Quick Access Toolbar
, as shown below:
Fig 50: Displaying the Spray Button
