Page
17
of
36
SubliXpress
7. Printing
Nozzle Testing
Before starting with calibration tests, the Print Heads should be checked for blockage. Each Print Head
has multiple tiny nozzles through which ink drops emerge and get deposited onto the print medium.
Any nozzle blockage can compromise the print quality by forming discolored horizontal streaks or
bands.
The good and bad nozzle test results are shown in the image below:
Fig 20: Displaying the Good and Bad Nozzle Test Result
To check the nozzle, click on the
Check Nozzle
icon available on the
Quick Access Toolbar
, as shown
below:
Fig 21: Selecting the Check Nozzle Button
In case of blockages, refer to the Head Cleaning section to perform head cleaning before proceeding
to other calibration steps.
