Colorjet SubliXpress plus, Руководство пользователя

Страница: 12 / 40

Page 11 of 39
SubliXpress Plus
The Setting window with the Printer tab is shown in the below image:
Fig 8: Displaying the Setting Window
Describing the different sections of the Setting window, as given below:
Print setting
Auto skip white
: Enable to auto
skip the white space in the image
during printing.
Step Time : Set time interval of the
feed motor during printing.
Job Space : Set space between
multiple jobs.
Feather : Feather type should be
“Gradient” only and intensity
percentage of the feather should
be 5-100 as per the media type.
Multiple Ink : Enable to select the
color depth of an image according
to the passes. The available
options are Default, Double, and
More.
Color Bar
Space
: Specify the distance
of the color bar from the
image.
Width : Set width of the
color bar.
Placement : Enable or
disable the color bar and
its placement viz. left,
right, or both.
Height same with image : If
enabled, the height of the
color bar is same as the
image height.
Spray setting
Auto Spray
: Set the duration (number of
passes) for auto spraying.
Spray Period : Define the duration for
spraying. If the duration increased, spray
frequency gets decreased.
Print Pre-spray Time : This option works
when the Spray Before Print option is
enabled and used for defining the
duration, if spray before issuing the Print
command.
Idle Spray : Spray during carriage at home
position. This option must be enabled.
Spray Before Print : This option enables
spray before start of print.
These values can
change as per the
requirements.