The motherboard has one M.2 slot,support PCI-e x4 and SATA SSD,support 2242/2280 size SSD.
Please install M.2 SSD correctly in the slot following the following steps:
1. please use a screwdriver to remove the screws and studs in order, and then lock the stud first when the actual M.2 SSD is found
to be suitable for the screw hole position.
2. insert the M.2 SSD into the slot in a inclined angle.
3. press M.2 SSD, then lock the screw.
2.7.10.M.2 slot
There is a CMOS RAM on board that has a power supply from external battery to keep the system configuration data. With the
CMOS RAM, the system can automatically boot OS every time it is turned on. If you want to clear the system configuration, use
the CLR_CMOS Jumper to clear data.
2.7.9.Clear CMOS Jumper: CLR_CMOS
You can clear CMOS by shorting 1-2 pin. Before you clearing the CMOS, following next procedure:
1.Turn off the AC power supply and connect pins 1 and 2 together using the jumper cap.
2.Return the jumper setting to normal (pin 1 or 2) or Remove the jumper cap
3.Turn the AC power supply back on.
Clear CMOS PROCEDURE
1-2 clear CMOS
1or2 normal
Clear CMOS settings
