2.7.Connecting Cables and Setting Switches
2.7.1.ATX power connectors (24-pin ATXPWR, 4-pin ATX12V)
These connectors are for an ATX power supply. The plugs from the power supply are designed to fit these connectors in only
one orientation. Find the proper orientation and push down firmly until the connectors completely fit.
2.7.2.Power off charging and PS2 mouse/keyboard wake up jumper
Only the PS2+USB ports on the back panel can support the shutdown charging function.You can open this function by short-
ing 2-3pin.
Note: the white silk-screen "1" on the PCB is the first needle of jumper.
This section takes you through all the connections and switch settings necessary on the motherboard. This will include:
Power Connections
24-pin ATX power
4-pin ATX 12V power
Internal Headers
Front panel
USB Headers
Audio
Serial ATA III
Chassis Fans
Rear panel USB 2.0 Adapter
Expansion slots
