OPERATION
(
1
)
There are 7 preset fading effects
F01 Color fade: All the fixtures run the fixed colors in order simultaneously.
F02 Cross fade: All the fixtures will be separated into two groups which based on
odd and even numbers. Each group will run a smooth transition from one
solid color to another sequentially.
F03 Color Cavort: An animated color effect will chase in order from the first fixture
to the last one.
F04 Color Sweep: A smooth color transition will spread from the first fixture to the
last one
F05 Rainbow Cavort: A sequence of rainbow colors will chase from the first fixture
to the last one in one direction.
F06 Rainbow Sweep: A sequence of rainbow colors moving in one direction
gradually.
F07 Color fade: All the fixtures run the fixed color C1 and C2 in order
simultaneously.
example: C1
C2
C1
C2
C1
C2
.
Example 1
a
.
Condition: Total 30 units with RGBW 4-color led, install in 5 groups, needed
every 6 units in same address, total needed 5 DMX address number.
b
.
DMX address setting
Group 1 (the first 6 units): DMX address setting 1
Group 2 (the second 6 units): DMX address setting 5
Group 3 (the third 6 units): DMX address setting 9
Group 4 (the fourth 6 units): DMX address setting 13
Group 5 (the fifth 6 units): DMX address setting 17.
(For DMX address setting, please refer user manual of dipswitch page of Orbit lighting include with package)
c. CH setting must be 5 for each group under this condition.
Example 2
a
.
Condition: Total 4 units with tri-color led, every unit need one address, total
need 4 DMX address number.
b
.
Group 1 (the first unit): DMX address setting 1
Group 2 (the second unit): DMX address setting 4
Group 3 (the third unit): DMX address setting 7
Group 4 (the fourth unit): DMX address setting 10.
(For DMX address setting, please refer user manual of dipswitch page of Orbit lighting include with package)
c. CH setting must be 4 for each group under this condition.
Condition: Under the FADING mode, adjust BRIGHTNESS and SPEED of F01
.
To adjust the brightness of F01
, touch the [BRIGHTNESS] bottom first, and slide
the slider to get favorite brightness.
To adjust the speed of F01, touch the [SPEED] bottom first, and slide the slider
to get the favorite speed.
The adjustment of BRIGHTNESS and SPEED will save automatically. Please do
not touch [FADING] bottom again.
(
4
)
Operation Example
NOTE: RGB and White mode cannot be used in FADING mode, the display will
shown
『
---
』
; only the BRIGHTNESS and SPEED can be adjusted.
NOTE: In FADING mode, the lowest brightness value can only be adjust to the
100.
The FADING effects can be selected by gliding the slider on Orbit TP.
(
2
)
In fading mode, the changes are saved automatically each time when enter a new
value.
(
3
)
Memory function
www.colorbeam.com
9
