9
Limit the amount of materials processed to 1 pint.
Completely remove the center portion of the two-piece container lid before starting motor
(this will allow venting of the rapidly heated and expanded air inside the container when
blender is running).
Always start blending on lowest speed setting, and the progress to desired speed.
Never stand directly over blender when it is being started or while it is running.
TURNING OFF YOUR BLENDER
Whether your blender is in STANDBY mode, NEW PROGRAM mode, or the motor is running,
pressing the ON/OFF
button will stop the unit from running and will turn the power off. The
LED display will turn off.
NOTE: All programs and current settings will be restored next time you turn unit on.
Remark:
1. On all units the built-in thermal sensor keeps track of how hot the motor
gets and will automatically shut down the motor if the motor is overheating.
User should remove the container and run the machine until cool. This takes
about 2 minutes.
2. Special Note:
Please check your operation when the motor is overheated. If the machine run
all the day or the material is too thick , it will easy to get overheated.
Disassembling your blender for cleaning, care and storage
