5
Deck Clock
Handheld controller
Follow the instructions in the handheld controller manual to set the handheld controller to
the same channel, PAN and module as the clock you want to control with it. The clock
will display game time and shot time as sent from the controller. Follow the general
instructions for all sports.
Sports Timer
The deck clock can display game time and shot time from a CTS System 6 or System 5
sports timer running Water Polo. You can also turn off the ambient light sensor and set a
specific intensity on the clock with the System 6.
For information to display correctly on the deck clock, two of the sports timer’s
scoreboard channels must be set to the factory default scoreboard channels. Specifically,
Channel 1 displayed on Module 1
Channel 2 displayed on Module 3
You can easily set all scoreboard channels to the factory defaults through the Scoreboard
menu, Define Module submenu, by choosing Default Scbds. Refer to your System 6 or
System 5 Water Polo manual for more information.
In addition, on a System 6, also go to the Game Setups menu, Scoreboard Time Display
submenu, and choose “Don’t Show Running Tenths” instead of “Show Running Tenths.”
Connect your Sports Console to the scoreboard in one of two ways:
1.
Directly with data cables (R-xxDC)
2.
Connect the Sports Console to a 2.4 GHz wireless adapter (WA-2) and follow the
instructions in the WA-2 user manual to set it to the same channel and PAN as the
scoreboard(s) you want to control. Be sure to set the dip switch for Sports
Console to Multisport Scoreboard.
Changing Module, Channel and PAN at the control board
The most convenient way to change the clock’s module, channel and PAN is with the
push button (see page 3). You can also change them by changing the switch settings on
the clock’s control board, as described here.
1.
Make certain the unit is disconnected from AC power.
2.
Remove the 9 screws from the weather cover with a Phillips head screwdriver.
Remove the weather cover, and set it and the screws in a safe place.
3.
Remove the large digit on the left. Using a Phillips head screwdriver, unscrew the
retaining screws and set them in a safe place. Carefully lean the digit against the
enclosure.
4.
Set the module, channel and PAN using the dip switches on the circuit board
immediately behind the digit you removed:
Содержание MS-0043
Страница 4: ......
