Colorado time systems MS-0043, Руководство пользователя

Страница: 6 / 14

2 Deck Clock
Operating Instructions
In order to receive data from a wireless controller, a clock must be set to the same
Channel and PAN as the controller. Additionally, the clock’s Module number must be
selected as active in the appropriate menu of the controller (see controller manual for
more information.) If two or more clocks/scoreboards are set to have the same Channel,
PAN, and Module, they will show the same data. If two controllers are set to the same
Channel, PAN, and Module, erroneous data will be displayed on the
clock(s)/scoreboard(s).
If you have more than one scoreboard and are using the tabletop controller, map out your
scoreboard strategy, and set the channel, PAN and module for each board accordingly.
For expanded examples of how to do this, refer to our website www.coloradotime.com.
The default factory settings are Channel 4, PAN 0 and Module Address 1. To set the
module, channel and PAN, use the clock’s push button, as described below. You can also
set them by changing the switch settings on the clock’s control board, as described on
page 5.
Synchronizing clocks
To set multiple clocks to the same time, they must be set to the same channel and PAN
(see below).
Turn on all of the clocks. They will synchronize with each other within two minutes.
To change their time , turn all of the clocks on, and set one as described below. As soon
as time is changed on that clock and you have exited the menu, it will send the selected
settings to the other clocks.
Other settings including clock format and intensity (brightness of the digits), and
channel, address and PAN must be set individually for each clock to accommodate clocks
in different environments (shade and sun, for example).
Set time, digit intensity and module, channel and PAN
Use the push button on the back of the clock to set the time on the clock, digit intensity,
module, channel and PAN, and other characteristics.
Hold the button for 2 seconds and release to cause the clock to enter the menu. The clock
enters Menu 1, as described below. Once in the menu, hold for one second to advance to
the next menu item. If you continue to hold, the clock will step through the menu options
every second. Release the button when you are in the menu option you wish to set.