.13.
The following points have to be considered during the inspection:
1) All screws for installing the devices or parts of the device have to be tightly
connected and must not be corroded.
2) There must not be any deformations on the housing, color lenses, fixations and
installation spots (ceiling, suspension, trussing).
3) Mechanically moved parts must not show any traces of wearing and must not
rotate with unbalances.
4) The electric power supply cables must not show any damage, material fatigue or
sediments.
Further instructions depending on the installation spot and usage have to be
adhered by a skilled installer and any safety problems have to be removed.
In order to make the lights in good condition and extend the life time, we suggest a
regular cleaning to the lights.
1) Clean the inside and outside lens each week to avoid the weakneness of the lights
due to accumulation of dust.
2) Clean the fan each week .
3) A detailed electric check by approved electrical engineer each three month, make
sure that the circuit contacts are in good condition, prevent the poor contact of
circuit from overheating.
We recommend a frequent cleaning of the device. Please use a moist, lint- free cloth.
Never use alcohol or solvents.
There are no ser viceable parts inside the device. Please refer to the instructions
under “Installation instructions”.
Should you need any spare parts, please order genuine parts from your local dealer.
MAINTENANCE AND CLEANING
10
Disconnect from mains before starting maintenance operation.
CAUTION
0-255
0-255
0-063
064-127
128-191
192-255
0-063
064-127
128-191
192-255
0-191
192-223
224-255
0-225
226-235
236-245
246-255
0-019
020-029
030-039
040-079
080-099
100-119
120-139
140-159
160-179
180-199
200-219
220-239
240-255
0-100% Linear dimmer
In(near) to out(far)
OFF
3 Facet Prism
Prism 2
Frost
Prism rotation stop
Forwards rotation from fast to slow
Prism rotation stop
Backwards rotation from slow to fast
Max. diameter to Min.diameter
Pulse opening fast to slow
Pulse closing slow to fast
Max to min speed
Blackout by movement
Blackout by all wheel changing
No function
No function
No function
No function
No function
Motor reset
Internal program 1
Internal program 2
Internal program 3
Internal program 4
Internal program 5
Internal program 6
Internal program 7
Internal program 8
2
8
9
10
7
13
14
8
9
10
11
12
13
14
10
11
12
13
14
15
16
Dimmer
Focus
Prism,
Frost
Rotating
Prism
Iris
Speed of
Pan/Tilt
Special
