3.
3.
3.
3. Operation
Operation
Operation
Operation Instructions
Instructions
Instructions
Instructions
-The LED Zoom Par is for beam effect for onsite decoration purpose.
-Don’t turn on the fixture if it’s been through severe temperature difference like after
transportation because it might damage the light due to the environment changes. So make sure
to operate the fixture until it is in normal temperature.
-This light should be keep away from strong shaking during any transportation or movement.
-Don’t pull up the light by only the head, or it might cause damages to the mechanical parts.
-Don’t expose the fixture in overheat, moisture or environment with too much dust when installing
it.
And don’t lay any power cables on the floor. Or it might cause electronic shock to the people.
-Make sure the installation place is in good safety condition before installing the fixture.
-Make sure to put the safety chain and check whether the screws are screwed properly when
installing the fixture.
-Make sure the lens are in good condition. It’s recommended to replace the units if there are any
damages or severe scratch.
-Make sure the fixture is operated by qualified personnel who knows the fixture before using.
-Keep the original packages if any second shipment is needed.
-Don’t try to change the fixtures without any instruction by the manufacturer or the appointed
repairing agencies.
-It is not in warranty range if there are any malfunctions from not following the user manual to
operate or any illegal operation, like shock short circuit, electronic shock, lamp broke, etc.
8.
8.
8.
8.DMX
DMX
DMX
DMX Channels
Channels
Channels
Channels
Chanel
Chanel
Chanel
Chanel
Function
Function
Function
Function
Values
Values
Values
Values
Description
Description
Description
Description
1
Zoom
0-255
Zoom from
10° to 60°
2
Speed
0-255
Zoom speed from fast to slow
3
Dimmer
0-255
Dimmer from 0-100%
4
Red
0-255
Red from 0-100%
5
Green
0-255
Green from 0-100%
6
Blue
0-255
Blue from 0-100%
7
Macro
0-255
19 Preset colors and 3 built-in programs
8
Strobe
Speed
0-255
Strobe and built-in program speed from fast to slow
9
Reset
0-199
Empty
200-220
Reset after 3 seconds
221-255
Empty
