Colonial Label Thermal System, Руководство пользователя, Страница: 10 / 17

TROUBLESHOOTING
If the printer is printing labels out one label and spitting out
several other labels.
If getting red light after printing one label.
If keypad is reading “Form-retrieve form F2 - list
forms v2.8 and will not respond, when pressing form
•
•
•
•
•
•
•
•
•
Open lid
Pull 6 labels out of machine but, not ripping them off
the roll.
Then peel labels off backing.
Roll backing back on roll of labels as if you were
loading labels in machine.
Close machine.
Do Autosense.
Power machine off and back on.
Push green button one time.
Print a few labels out to see if it still pushes
labels out.
Power machine off
DO NOT OPEN LID
Do AutoSense WITHOUT peeling labels off.
Power machine off and back on.
Push green button one time.
Print a few labels out
Make sure ribbon is in tight and notches on ribbon
and machine match up.
Then do AutoSense.
Power machine off.
Unplug keypad.
Make sure the prongs are not bent.
Plug keypad in good and tight.
Power unit on and see if keypad works.
Repeat 2 times more if it still does not work.
9
1.
3.
4.
•
•
•
•
•
•
•
•
•
•
•
•
•
IF THE PRINTER IS STILL PUSHING LABELS OUT
2.
**If this does not work the first time try another 2 times.
***when doing AutoSense it may push out as many as
20 labels before printing info upside down.