NCS-C151 Manual Rev B
Page 11
9.0 Radio Interface Cables
A Radio Interface Cable is required for each radio interfaced to the C151. This
cable contains mic audio, receive audio and PTT signals. It can be fabricated
from the documentation supplied in the instruction manual or obtained from
NCS. The cable consists of an RJ-45, 8 pin modular connector on one end for
mating to the C151 and a radio interface connector on the other end. Un-
terminated cables are also available that require the customer to attach the
radio interface connector.
Most commercial radios have an accessory connector that usually has mic
audio, receive audio and PTT connections available. This is the preferred
interface to the NCS-C151.
Specifying Radio Interface Cables
NCS can supply Radio Cables for almost any radio. Standard cable length is
six feet, however, custom lengths are available. Since there are numerous
connector types for interfacing to various commercial and amateur radio
transceivers, the radio model and connector type should be specified at the
time of purchase.
