10
Frame
Unfolding the frame
The assembled frame should be placed on the ground. Then attach the rear and front wheels. Press transport lock on the left
side of the chassis ( g.16). By this you will release hand grip and by pulling it up you will unfold the stroller. Clicks will
signalize the correct assembly. Pull up the handlebar to be sure that the chassis and its locks are secured (the chassis doesn’t
fold).
Frame assembly:
ATTENTION! Before folding the stroller, unlock the front wheels!
Release the baby stroller brakes. Then move the lock button located in the middle of the handle to the left and
simultaneously press the folding button located under the handle ( g. 1). Fold forward towards the frame. The stroller lock
used to transport it will lock automatically. The click sound will signal the correct installation.
Wheels:
Installation of rear wheels:
Before mounting the wheels, install the rear axle part, applying the rear legs of the stroller (Fig. 2).
Installation: Press the quick release system button ( g. 3). Insert the wheels on the axle and release the button. Try to pull
the wheels to make sure they are properly mounted and do not loosen.
Disassembly: Press the quick release system button ( g. 3). Pull the wheel off the axle.
Fitting the front wheels: Mount the wheels on the front fork (4).
Lock the rotation of the front wheels: move the lock down until you hear a click.
Releasing the front wheel lock: move the lock button up until you hear a click.
Parking brake: After stopping the stroller, park it by pressing the brake lever down ( g. 6). Raising the brake lever up releases
the brakes.
Extension of the canopy: Spread the lock located in the middle of the canopy and gently pull the booth down to extend it
( g. 10).
Assembly of the baby stroller bumper:
Insert the bumper into the holes on both sides of the stroller (Fig. 14a). Make sure that the bumper is properly installed
pulling it towards you.
To dismantle the bumper, press the buttons on both sides of the bumper ( g. 14b).
Backrest adjustment:
To adjust the backrest, squeeze the adjustment mechanism at the back of the backrest and move it up and down on the strap.
In this way, the backrest can be adjusted ( g. 15). Press the backrest down to make sure that the mechanism is locked (you
can not lower it).
Adjusting the footrest:
The footrest can be adjusted by pressing the buttons on both sides of the footrest and positioning it in the chosen position
( g. 16).
Footcover:
Put the footcover and fasten on both sides of the stroller.
Additional accessories
Raincover:
Wear a raincoat on the stroller in case of bad weather conditions (rain, snow).
Carrying stroller:
Use ramps and lifts if possible. If you have to get over the stairs or other obstacles, the stroller must be carried by 2 persons at
least. Never do that if you or your assistant are not sure that you can carry the stroller with child safely. During the carriage
INSTRUCTIONS FOR USE
Содержание Nevia VT
Страница 3: ...2 ...
