Connect Frame to Tent
–Insert one pin into the end of gray side tent
pole at tent corner. (illus. 3, illus. 4)
–Go to opposite end of pole and gradually
apply pressure to the pole forming an arch
until you are able to insert the pin into the
pole end. (works best with two people)
–Choose either black pole and insert the pin
into one end of the main tent pole and
gradually apply pressure forming an arch
until you can insert the pin in the other end
–Repeat for second black main tent pole.
(illus. 3, illus. 4)
TACOMA
™
13’x9’
1
Layout & Positioning
of Tent, Pole Assembly
–Layout and position tent with doors
facing desired directions. (illus. 1)
–Unzip doors.
–Stake down tent, using the rings on the
stake loops. Keep the floor taut. (illus. 2)
–Assemble frame poles by interlocking
shock-corded poles. (three poles)
–Insert the black main tent poles through
the two pole sleeves (ea.) as shown
below. The poles will run parallel. (illus. 1)
–Insert the longer gray side pole through
the three pole sleeves running the
opposite direction of the black poles. The
gray pole should be on top of the black
poles where they cross.
2
When You Are Ready To Set
Up Your Tent
–Select a level campsite clear of
rocks, branches and other hard or
sharp objects.
–Do not set up your tent under trees.
–For best results in windy conditions,
position the end of tent into the wind.
–See owners manual for more tips.
Rainfly Poles
Door
Grey side pole
through pole
sleeves and over
black poles
Assembled black main tent poles
inserted through pole sleeves
Instructions apply to Part Number 9277-139
illus. 1
illus. 2
Tent stake
through ring
on stake loop
illus. 4
Tent frame
set-up
Part No. 9277-407
Part No. 9277-406
Part No. 9277-408
Main Tent Pole (Black)
Side Pole (Gray)
illus.3
Insert pin into pole end
Rainfly Part No. 9277-409
Grommets for
rainfly poles
Door
