THE COLEMAN CO., INC.
3600 N. Hydraulic • Wichita, Kansas 67219
1-800-835-3278 • www.coleman.com
MADE IN CHINA
PRINTED IN CHINA
Rev. 7/03
Things You Should Know
•
Under certain conditions (cold weather, high humidity, etc.)
condensation will form on the inside surfaces of your tent. Condensation is
caused by water vapor from your breath, perspiration, or any wet clothing
inside your tent. It is NOT LEAKAGE through the tent fabric. It can be mini-
mized by removing wet clothing from your tent and by providing good ventila-
tion through the tent.
•
Never store tent, even for a short period of time, without drying it thorough-
ly and brushing off caked dirt. Do not pack stakes or poles inside your tent.
Use a separate storage bag.
•
STAKES SHOULD BE REMOVED BY PULLING ON THE STAKE ITSELF.
NEVER PULL ON THE TENT FABRIC OR TENT STAKE LOOP TO
REMOVE STAKE.
•
TENT POLES SHOULD NOT BE LEFT TELESCOPED
TOGETHER DURING STORAGE.
•
Seam sealer has not been provided with your tent. We recommend seam
sealing your tent prior to camping. Seam sealer may be purchased through
your local retailer or at your local sporting goods store.
•
Do not leave your tent set-up for weeks at a time, be aware that expo-
sure to the ultraviolet rays of the sun can seriously damage material and/or
cause it to become discolored.
•
See owners manual for more tips.
WARNING:
KEEP ALL FLAME AND HEAT SOURCES
AWAY FROM THIS TENT FABRIC. This tent meets the flammability
requirements of CPAI-84.The fabric will burn if left in continuous contact with
any flame source.The application of any foreign substance to the tent fabric
may render the flame-resistant properties ineffective.
Attach Tent to Frame
Using Frame Clips
–Attach frame clips along
the edges of tent to frame poles.
(illus. 5), (illus. 6)
–Make any adjustments to the tent
corner stakes that are needed.
3
4
Attach Rainfly
–Assemble rainfly poles by
interlocking shock-corded pole.
–Insert rainfly poles through pole
sleeves located at the center edges
of the underside of rainfly.
(illus. 7), (illus. 8)
–Drape rainfly over tent frame, pole
side down. Rainfly poles should
be over doors.
–Connect the six elastic loops with
“S” hooks, (found at the rainfly
corners) to the six rings
located at the end of the stake
loops at the corners of the tent.
–Insert the tips of the rainfly poles
into the grommets on the front and
rear of tent. (See above illus. 6)
–Secure rainfly with attachments
located on underside of fly. (illus. 8)
–Stake out the tent with (2) side
guylines and (4) corner guylines.
illus. 6
Assembled tent without rainfly.
Grommets for rainfly pole
illus. 5
Frame clips
illus. 7 Insert rainfly
pole piece into pocket
on underside of rainfly
illus. 8 Completed tent with rainfly.
Underside of
rainfly attaches
to frame poles
Side
guyline
Corner
guyline
Corner
guyline
Rainfly pole in
grommet
“S” hooks attach to
rings at the corners
Rainfly pole
through
pole sleeves
Clear window
